GÜDE Expert Power Control 8314, Manual

Page: 95 / 111

95
Expert Power Control 8316 © 2022 GUDE Systems GmbH
Specifications
Input Registers
Device Resource Start End Function
Info Bereich 0x000 0x005 see table
CPU Sensor values 0x080 0x083 see table
Externe Sensoren 0x100 0x1ff see table
Fan Level 0x200 0x20f 0 (aus) bis 3 (maximal)
Line Energy Sensors 0x400 0x39ff see table
Port Energy Sensors 0x3a00 0x81ff see table
Bank Energy Sensors 0x8200 0x823f see table
Power Source Sensors 0x8240 0x827f see table
Residual Current Monitor 0x8280 0x82cf see table
Info Area
Address Width Information
0 16-bit Number of Ports (Relay)
1 16-bit Number of Ports (Outlets) with
Energy Measurement
2 16-bit Number of Banks
3 16-bit Number of Line-In
4 16-bit Phases per line
5 16-bit Number of Inputs
Sensor Type Description
Address Width Information
0x080 to 0x083 16-bit (signed CPU Sensor values
0x100 to 0x1ff 16-bit (signed) external Sensors
0x400 to 0x39ff 32-bit (signed) Line Energy Sensors
0x3a00 to 0x81ff 32-bit (signed) Port Energy Sensors
0x8200 to 0x823f 16-bit (signed) Bank Energy Sensors
0x8240 to 0x827f 16-bit (signed) Power Source Energy Sensors
0x8280 to 0x82cf 16-bit (signed) Residual Current Monitor
CPU Sensor Values
Offset Sensor Field Unit
0 Vsystem 0.01 V
1 Vaux 0.01 V
2 Vmain 0.01 V
3 CPU Temperature 0.1 °C
External Sensors:
The measured value of the external sensors are coded as fixed point arithmetic. For a
factor of e.g. 0.1 in the unit the value must be divided by 10 in order to reach the real
measured value. A value of 0x8000 means that no sensor is plugged into the corres-
ponding port, or the corresponding field in the sensor is not available. The formula for the
address is (the port numbers start at zero):