GÜDE Expert Power Control 8314, Manual

Page: 16 / 111

16
Expert Power Control 8316 © 2022 GUDE Systems GmbH
Operating
"Firmware Update", "SSL Certificate Upload" or "Config Import File Upload" and press
"Upload". The file is now transferred to the update area of the device and the contents
are checked. Only now, pressing the "Apply" button will permanently update the data, or
abort with "Cancel".
Only one upload function can be initiated with a reboot, eg. you cannot transmit firm-
ware and configuration at the same time.
If after a firmware update, the web page is not displayed correctly anymore, this may
be related to the interaction of Javascript with an outdated browser cache. If a Ctrl-F5
does not help, it is recommended that you manually delete the cache in the browser op-
tions. Alternatively, you can test start the browser in "private mode".
During a firmware update, old data formats are sometimes converted to new struc-
tures. If an older firmware is newly installed, the configuration data and the energy
meters may be lost! If the device then does not run correctly, please restore the factory
settings (e.g. from the Maintenance Page
).
Actions in Bootloader mode
If the web interface of the device is no longer accessible, the device can be put into
Bootloader mode (see chapter Bootloader activation
). The following functions can be
executed using the GBL_Conf.exe application:
·
Set IPv4 address, net-mask and gateway
·
Turn HTTP password on and off
·
Turn IP-ACL on and off
·
Factory Reset
·
Allow jump from firmware to bootloader
·
Restart the device
For devices with relays, entering or exiting the bootloader mode does not change
the state of the relays as long as the operating voltage is maintained.
The GBL_Conf.exe program is available free of charge on our website www.gude.info and
can also be found on the enclosed CD-ROM.
18
20