GÜDE Expert Power Control 8314, Manual

Page: 59 / 111

59
Expert Power Control 8316 © 2022 GUDE Systems GmbH
Specifications
4.6.1
Device MIB 8314
Below is a table of all device-specific OID 's which can be accessed via SNMP. In the
numerical representation of the OID the prefix " 1.3.6.1.4.1.28507 " (Gude Enterprise
OID) was omitted at each entry in the table to preserve space. The example for a com-
plete OID would be "1.3.6.1.4.1.28507.64.1.1.1.1". A distinction is made in SNMP OID 's
in between tables and scalars. OID scalar have the extension ".0" and only specify a
value. In SNMP tables the "x" is replaced by an index (1 or greater) to address a value
from the table.
Name OID Type Acc.
Description
epc8314TrapCtrl .97.1.1.1.1.0 Integer32 RW
0 = off 1 = Ver. 1 2 = Ver. 2c 3 = Ver. 3
epc8314TrapIPIndex .97.1.1.1.2.1.1.x Integer32 RO
A unique value, greater than zero, for each receiver slot.
epc8314TrapAddr .97.1.1.1.2.1.2.x OCTETS RW
DNS name or IP address specifying one Trap receiver slot. A port can
optionally be specified: 'name:port' An empty string disables this slot.
epc8314portNumber .97.1.3.1.1.0 Integer32 RO
The number of Relay Ports
epc8314PortIndex .97.1.3.1.2.1.1.x Integer32 RO
A unique value, greater than zero, for each Relay Port.
epc8314PortName .97.1.3.1.2.1.2.x OCTETS RW
A textual string containing name of a Relay Port.
epc8314PortState .97.1.3.1.2.1.3.x INTEGER RW
current state a Relay Port
epc8314PortSw itchCount .97.1.3.1.2.1.4.x Integer32 RO
The total number of sw itch actions ocurred on a Relay Port. Does not
count sw itch commands w hich w ill not sw itch the ralay state, so just
real relay sw itches are displayed here.
epc8314PortStartupMode .97.1.3.1.2.1.5.x INTEGER RW
set Mode of startup sequence (off, on , remember last state)
epc8314PortStartupDelay .97.1.3.1.2.1.6.x Integer32 RW
Delay in sec for startup action
epc8314PortRepow erTime .97.1.3.1.2.1.7.x Integer32 RW
Delay in sec for repow er port after sw itching off
epc8314PortResetDuration .97.1.3.1.2.1.8.x Integer32 RW
Delay in sec for turning Port on again after Reset action
epc8314ActivePow erChan .97.1.5.1.1.0 Unsigned32 RO
Number of suppported Pow er Channels.
epc8314Pow erIndex .97.1.5.1.2.1.1.x Integer32 RO
Index of Pow er Channel entries
epc8314ChanStatus .97.1.5.1.2.1.2.x Integer32 RO
0 = data not active, 1 = data valid
epc8314AbsEnergyActive .97.1.5.1.2.1.3.x Unsigned32 RO
Absolute Active Energy counter.
epc8314Pow erActive .97.1.5.1.2.1.4.x Integer32 RO
Active Pow er
epc8314Current .97.1.5.1.2.1.5.x Unsigned32 RO
Actual Curent on Pow er Channel.
epc8314Voltage .97.1.5.1.2.1.6.x Unsigned32 RO
Actual Voltage on Pow er Channel
epc8314Frequency .97.1.5.1.2.1.7.x Unsigned32 RO
Frequency of Pow er Channel
epc8314Pow erFactor .97.1.5.1.2.1.8.x Integer32 RO
Pow er Factor of Channel betw een -1.0 and 1.00
epc8314Pangle .97.1.5.1.2.1.9.x Integer32 RO
Phase Angle betw een Voltage and L Line Current betw een -180.0 and