GÜDE Expert Power Control 8314, Manual

Page: 86 / 111

86
Expert Power Control 8316 © 2022 GUDE Systems GmbH
Specifications
VT_SMS=3,EVT_GSMEMAIL=4,EVT_BEEPER=5,E
VT_DISPLAY=6,EVT_CONSOLE=7,EVT_MQTT=8}
"
linesensor {line_num} events type show
LEGACY - show s w hat event types are enabled L
linesensor {line_num} maxval set {float} LEGACY - sets maximum value for line meter L
linesensor {line_num} maxval show LEGACY - show s maximum value for line meter L
linesensor {line_num} minval set {float} LEGACY - sets minimum value for line meter L
linesensor {line_num} minval show LEGACY - show s minimum value for line meter L
linesensor {line_num} hyst set {float} LEGACY - sets hysterese value for line meter L
linesensor {line_num} hyst show LEGACY - show s hysterese value for line meter L
linesensor {line_num} {BELOWMIN=0|
ABOVEMIN=1|ABOVEMAX=2|BELOWMAX=3} port
set {port_num}
LEGACY - sets Port for Pow er Port Sw itching
actions
L
linesensor {line_num} {BELOWMIN=0|
ABOVEMIN=1|ABOVEMAX=2|BELOWMAX=3} port
show
LEGACY - show s Port for Pow er Port Sw itching
actions
L
linesensor {line_num} {BELOWMIN=0|
ABOVEMIN=1|ABOVEMAX=2|BELOWMAX=3}
state set {OFF=0|ON=1|DISABLED=2}
LEGACY - sets Port state for Pow er Port
Sw itching actions
L
linesensor {line_num} {BELOWMIN=0|
ABOVEMIN=1|ABOVEMAX=2|BELOWMAX=3}
state show
LEGACY - show s Port state for Pow er Port
Sw itching actions
L
modbus enters cmd group "modbus"
modbus enabled set <off=0/on=1> enables Modbus TCP support
modbus enabled show show s if Modbus is enabled
modbus port set <ip_port> sets Modbus TCP port
modbus port show show s Modbus TCP port
mqtt enters cmd group "mqtt"
mqtt {broker_idx} enabled set {OFF=0|ON=1} enable mqtt
mqtt {broker_idx} enabled show show s if mqtt enabled
mqtt {broker_idx} server set "{dns_name}" sets broker name
mqtt {broker_idx} server show show s broker name
mqtt {broker_idx} tls enabled set {OFF=0|ON=1} enable TLS
mqtt {broker_idx} tls enabled show show s if TLS enabled
mqtt {broker_idx} port set {ip_port} set broker TCP/IP port
mqtt {broker_idx} port show show s broker TCP/IP port
mqtt {broker_idx} user set "{username}" sets username
mqtt {broker_idx} user show show s username
mqtt {broker_idx} passw d set "{passw d}" sets passw ord
mqtt {broker_idx} passw d hash set "{passw d}" sets hashed passw d
mqtt {broker_idx} client set "{name}" sets client name
mqtt {broker_idx} client show show s client name
mqtt {broker_idx} qos set {QOS0=0|QOS1=1} sets QoS level
mqtt {broker_idx} qos show show s QoS level
mqtt {broker_idx} keepalive set {num_secs} sets keep-alive time
mqtt {broker_idx} keepalive show show s keep-alive time
mqtt {broker_idx} topic set "{name}" sets topic prefix
mqtt {broker_idx} topic show shw os topic prefix
mqtt {broker_idx} console enabled set {OFF=0|
ON=1}
permit console cmds
mqtt {broker_idx} console enabled show show s if console cmds allow ed
mqtt {broker_idx} device data timer set
{num_secs}
sets telemetry interval
mqtt {broker_idx} device data timer show show s telemetry interval
port enters cmd group "port"
port {port_num} state set {OFF=0|ON=1} sets port to new state
port {port_num} state show show s port state
port all state set "{port_list}" {OFF=0|ON=1}
sets several ports in one cmd - e.g. port all state
set "1,3,5" 1
port all state {MODE0=0|MODE1=1|MODE2=2}
show
show s all port states in 3 different view modes 4
port all set {OFF=0|ON=1|OFF_REV=2|ON_REV=3} sw itch all ports on/off forw ard or reverse