Windsor 500 Programming Manual - Issue C
- 9 -
Edit
In edit mode the engineer can modify the Windsor configuration from the default or current
settings. The edit options are organised in 3 pages. The 3 edit mode pages are shown below.
Some of the main edit options have sub-menus which will be displayed when the option is
selected. The menus shown are for version 3.00.
0=Defaults
0=Text
0=EvProg
1=System Size
1=Conc
1=Detector
2=Hardware
2=Cct
2=ATM
3=Site ID
3=KP
3=Bypass
4=Service Num
4=User
4=Alarm Limit
5=Pass Code
5=Reset
5=Set/Uns Opts
6=Common Area
6=Sounder
6=User Timer
7=Battery Test
7=Printer
7=User Opts
8=Cct Monitor
8=Light
↵
=Next Page
↵
=Next Page
9=Comms
↵
=Next Page
Edit Page 1
Edit Page 2
Edit Page 3
In the following section each menu option is explained in detail. When a cross reference is
made to an associated program option the menu path is specified. As an example an area set
TX option would be referenced as “Comms/TX/Area n/Set”, where n denotes the area number.
Windsor Editor
Editor Overview
When you select a configuration item data is entered in one of 4 ways;
•
as a number
•
selected from a Help menu
•
on/off
•
a text descriptor
Windsor Editor
Entering Numbers
Configuration items such as circuit programming require a number to be entered. Windsor will
prompt for a number indicating the number of digits to be entered by displaying “_” characters.
Circuit
Number-__
A 2 digit number is required
