Windsor 500 Programming Manual - Issue C
- 53 -
Edit page 2
Reset
Windsor has a number of reset options for each individual area and the system. To view or
modify the reset options select option 5 from page 2 of the edit menus followed by the system
or area number.
0=System
There are 2 reset menu options.
1=Areas
Reset menu
System
Man. Rst-Off
Guardall managed reset code in v3.00
Reset Seed-000
TX Reset-Normal
TX Rst Warn-Off
New in v3.00
Fire A.Rst-Off
Tam. Uns Rst-Off
230v A.Rst-Off
230v Flt-Off
230v Warn.-Off
New in v3.00
230v Delay-Off
New in v3.00
Alarm Abort-Off
New in v3.00
System reset menu
Man. Rst
The managed reset option works in conjunction with engineer reset. When an engineer reset is
required Windsor will display a randomly generated code
15
. The user must quote this number
to the alarm company who will give the user the corresponding reset PIN code. This should be
entered like a normal PIN code but is only valid for one reset. If Windsor accepts the code the
message “Reset OK” will be displayed for a few seconds but the user will not be logged on. A
successful managed reset will be logged in the event log.
Man. Rst
Off
On/Off
System reset menu
Reset Seed
The seed code will be used by the panel to generate a 6 digit code which will be displayed to
the user when a reset is required. This code must be quoted to the central station to obtain the
corresponding 6 digit managed reset PIN code. The programmed managed reset seed must
match the seed code used by the central station.
Reset Seed
0
000-255
System reset menu
TX Reset
If auto reset is programmed then at the end of the programmed sounder duration Windsor will
normally only reset the circuit TX output if the circuit is clear. Normal is the default TX reset
option.
System Rst
15
This code is generated using the programmed managed reset seed. If you intend to use this feature
the central station must be equipped with the Guardall managed reset PC package.
