62
©2016 Guangzhou ZHIYUAN Electronics
Date: 2016/12/08
User Manual
V1.00
C
Guangzhou ZHIYUAN Electronics Co., Ltd.
PA5000 Series Power Analyzer Start Guide
Adjust the knob in counter clockwise to decrease the range.
When the knob is pressed, the auto range mode is activated and the corresponding
Auto indicator lights up.
Figure 6-2: Voltage range display
When the voltage range is set, the voltage range value of selected input element is
displayed in real time.
(3) Set current range
If the current range is set when the current is measured directly without the use of
external sensor, users should turn off the external sensor before setting the current
range.
Disable the external sensor
Users can press the
“ExtSensor” button on the front panel shown in Figure 3-8 to turn
off the external sensor, and the ExtSensor button goes out.
Adjust current range
Adjust the current range knob to set the current range:
Adjust the knob in clockwise to increase the range.
Adjust the knob in counter clockwise to decrease the range.
When the knob is pressed, the auto range mode is activated and the corresponding
Auto indicator lights up.
Current measurement range display
When the current measurement range is set, the current range of selected input
element is displayed in the interface shown in Figure 6-3.
Figure 6-3: Current range display
(4) Set the current measurement ranges for other input elements
Users can repeat above steps to set the current measurement ranges for other input
elements.
