GST GST-IFP8, Installation And Operation Manual, Page: 58 / 66

GST-IFP8 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 48
Appendix 2 Internal Fault Description
No.
Problems Description Causes
1
AC Power AC power fault No AC power
2
Battery Battery fault No battery or low voltage
3
BAT Resistance Battery high resistance Battery aging or loose connection.
4
Panel charger Charger fault Charger circuit damaged.
5
Ground.F Ground fault Output loop connects to the ground.
6
Loop SW Loop open fault Class A loop opens.
7
Loop Short Loop short fault Class A loop shorts
8
F.P.E.A F.P.E. output loop fault F.P.E. output opens, shorts or the end of line
resistor is not connected.
9
Sounder A Sounder output loop
fault Souder output loop opens, shorts or the end
of line resistor is not connected.
10
ALARM
ROUTINGA Alarm routing fault Alarming routing opens, shorts or the end of
line resistor is not connected.
11
Power Board Power board fault Power board damaged or cannot
communicate with main board.
12
Loop Board Loop board fault Loop board damaged or cannot communicate
with main board.
13
Loop Flash Data Chip on the loop board
for storing data
damaged. Chip on the loop board for storing data
damaged.
14
ZoneDir Board Zone indication board
fault Zone indication board damaged or cannot
communicate with main board.
15
Keypad Board Key board fault Key board damaged or cannot communicate
with main board.
16
CRT Board CRT board fault CRT board damaged or cannot communicate
with main board.