GST-IFP8 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 28
FAR:OK FPE:DIS OTS:OK 20:44:30
*******************************************
*BROWSE C&E EQUATIONS*
C&E EQUATIONS total num:001
No.001
110100302×10100302= 0000006499
0000006599 0000006699
->Press [F1] to print All Equations
Fig. 6-8
The part before “
＝
” is the condition and that after it is the result.
“×” means “and”, and “
＋
” means “or”.
A condition is composed of the following items:
Event:
It is the message generated by the FACP when there is fire alarm or action
of device.
A result is composed of the following items.
On the screen for browsing C&E equation, if there is no fire alarm message, pressing F1
as prompted can print out all C&E equations.
6.2.1.7 Browsing History Log
Choosing 7 on the screen shown in Fig. 6-2, entering super password followed by
ENTER
will enter the screen for browsing history log, as in Fig. 6-9.
000 000 64 99
Delay time
(this figure multiplied by 10, maximum 10 minutes)
Device type
Device address
Zone number of the device
101 001 02
Device type
Device address
Zone number of the device
Summary of Contents for GST-IFP8
Page 1: ......