GST-IFP8 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 38
6.3.1.3 Communication Setup
Choosing
“3” on the screen of Fig. 6-21 will enter the screen for communication setup.
Monitoring devices and network devices in the system can be connected with the FACP
using the sub-menus under this screen.
FAR:OK FPE:DIS OTS:OK 20:44:30
*******************************************
*COMMUNICATION SETUP*
1.MONITOR INTERFACE
2.NETWORK INTERFACE
Fig. 6-25
6.3.1.4 Setting Start/Stop Time of Day Mode
Choosing
“4” on the screen of Fig. 6-21 will enter the screen for setting start and stop
time of day mode. If delay mode is enabled, the system will automatically enter delay
mode in during day time, and enter delay disabled mode outside the range of day time.
FAR:OK FPE:DIS OTS:OK 20:44:30
*******************************************
*DAY/NIGHT TIME SETUP*
Please input the start time of day mode
Default at 08:00 (hh:mm):[08]:[00]
Please input the end time of day mode
Default at 18:00 (hh:mm):[18]:[00]
Fig. 6-26
Summary of Contents for GST-IFP8
Page 1: ......