Conventional Fire
Alarm Panel
GST101
Features and Benefits
1.
Microprocessor controlled SMT
Electronics
2.
Compliant with EN54 part 2&4, &
BS5839, Part 4, 1988
3.
Both end of line resistors and active
end of line can be used.
4.
Programmable sounder circuits and
outputs
5.
Fully monitored sounder circuits
6.
Key control evacuate over-ride
7.
Class change terminals for remote
control
8.
Up to 25 fire detectors and infinite
manuals call points zone capacity
Description
GST101 Conventional Fire Panel is a kind of
multi-wire fire panel using single-chip
microprocessor. It can detect 1 zone. Each
zone can at most be connected with 15
conventional detectors. It has 2 output
control points through which it can control
some indicators, such as sounder strobes and
sounders, etc. The panel is designed with
stand-by batteries (two sealed acid storage
batteries) and reserved space for installation;
It has functions of operation indication, fault
indication, alarm indication and cable
checking for short circuit or broken circuit. It
can also identify the location of detecting
zone. Installation and operation of the panel
are very simple. All control functions are
realized through a key switch.
Technical Specifications
•
Approvals: LPCB
•
Operating Voltage
DC24V±15% or AC220V 50Hz
•
Stand-by batteries are configured on
order. The battery capacity can be
calculated according to the formula in
Clause 5.6 of this manual. The
maximum capacity is 4Ah (lasting for 24
hours in monitoring state).
•
Output voltage: DC20V DC28V
•
Static current: 2.4mA (connected with
15 conventional detectors)
•
Resistance when alarming fire: 150
Ω
1.5k
Ω
(normally 470
Ω
)
•
Terminal resistor: 4.7k
Ω
or using active
end of line unit(.AEOL)
•
Sounder: Output voltage DC20V to
DC28V, output current 1A, terminal
resistor 4.7k
Ω
.
•
Fault: Passive contact output, capacity
1A DC24V
•
Dimension:210mm×297mm×90mm
Selection of compatible devices.
Compatible with all GST conventional detectors
and sounders.
Ordering Information:
Part No
Description
Weight
/Kg
Pack
Qty per
Box
GST101 1
Zone
Conventional
Fire Alarm
Control Panel
2.45 1
MANUFACTURED IN ACCORDANCE WITH
Note: Specifications are subject to change without notice.
