Conventional
Combined Smoke and
Heat Detector
C-9101
F
eatures and Benefits
1.
Multifunctional and highly reliable
detector
2.
Sensing chamber for exceptional dust
proof ability
3.
Twin LED for 360
º
vision
4.
Low profile design
Description
I-9101 is a multifunctional and highly reliable
detector that able to sense fire cause by
polyurethane and heptanes fire. And also
detect fire with obvious rise of temperature
such as alcohol fire. With all the combined
features of standard optical and heat detector
makes this suitable for application in data
processing area like computer room and
telephone exchange.
Technical Specifications
•
Standard: EN54-part5, part6, part7
•
Protection rating: IP 22
•
Detecting Range:30m²
•
Operating voltage: 24Vdc (9Vdc to
24Vdc) polarized
•
Operating Current:
•
Standby: 0.1mA; Alarm:30mA
•
Operating temperature: -10~50°C
•
Relative humidity: 95%
•
Application: Indoor use
•
Material and colour: ABS, off-white
•
Wiring: 1 pair polarized
•
Dimensions:
diameter 10cm;
height 5cm
Selection of compatible Control Panels
Compatible with all GST Conventional panel
and GST Intelligent Fire Alarm Panels using
Zone monitor module:
Detector Installation
It is installed onto a standard one gang
electrical box with a mounting hole that
have 6.5cm spacing. Point the detector in
the base by the mark-line and secure the
detector in that position by rotates it
clockwise until it reaches the next mark line.
EMBEDDED BOX
CONCRETE PAD OR
HOLDING PAD
LED INDICATOR
MARK−LINE
ROTATE CLOCKWISE
2ND MARK−LINE
Wiring and Connection
Connect the wires to the required terminal
according to the wire diagram with
matching active end of line (P-9907).and
(DZ-03D) required base. Using active end
of line can connect up to 15 detectors and
base with diode. Using 4.7K
Ω
end of line
resistor can connect up to 25 detectors.
The cable must be fire rated type and the
size depends on the distance and
application. Minimum size gauge
1.0mm²(18 AWG)
Ordering Information:
Part No
Description
Weight/
Kg
Pack Qty
per Box
C-9101 Conventional
Combined Optical
Smoke and Dual
Heat Detector
0.123 120
DZ-03 Detector
Base
-
EOLR
0.05 360
DZ-03D
Base with Diode
AOL
0.05 360
MANUFACTURED IN ACCORDANCE WITH
Note: Specifications are subject to change without notice.
1
2
3
4
1
2
3
4
C−9101 SMOKE/HEAT DETECTOR
1
2
3
4
P−9907 ACTIVE
C−9102 SMOKE DETECTOR
END OF LINE
+
−
CONVENTIONAL
PANEL
OR
ZONE
MONITOR
MODULE
