UtilityScan Quick Start Guide
Page 11
First Time Setup
1
Set Language:
Make sure that the UtilityScan is in the ScanMax App. Tap on the Secondary Menu
softkey in the Menu Carousel to display the secondary menu. Tap Select Language and choose your
desired language.
2
Set Units:
Tap Units from the Menu Carousel to toggle between English (Imperial) and
Metric units.
3
Calibrate Antenna:
This option will run an auto-calibration routine on the antenna signal position. Assuming a
correct dielectric value, this will ensure your depths are more accurate.
4
Calibrate Survey Wheel:
While there is minimal manufacturing variation in the survey wheel encoders, it is still
a good idea to occasionally calibrate the survey wheel to ensure distance accuracy.
5
Save Prompt:
Tap this to toggle the Save File courtesy check on and off. Setting this to Off will cause the
UtilityScan to automatically save each file.
The choices you have made here will carry over to the ScanEZ Collection Apps.
The status indicator shows (from left to right):
1)
Antenna battery power.
2)
Tablet storage.
3)
Antenna connectivity (white = positive, gray = negative).
4)
LineTrac module (white = on,
gray = off, crossed = damaged.
5)
GPS indicator.
Secondary Menu Softkey
Summary of Contents for UtilityScan
