UtilityScan Quick Start Guide
Page 37
Section 5: Data Transfer to a PC
Data files you collect with the UtilityScan can be processed in GSSI’s GPR
data processing package, RADAN. Data transfer is done with a USB drive.
If you have purchased a UtilityScan with the
Consumer
tablet, you will need
the USB drive adapter cable. This cable was included with your system. If you
have misplaced it, they are commonly available at low cost from many
electronics stores.
UtilityScans equipped with the
Ruggedized tablet
do not require an adapter
cable because the ToughPad has a standard-sized USB port. Simply plug the
drive into the USB port.
You will get this message the first time you plug a new USB drive into either
tablet:
If you tap “Use by default….” than the UtilityScan app will automatically open when this USB is inserted.
USB drive
adapter cable,
(actual cable
may differ
slightly in
appearance)
Summary of Contents for UtilityScan
