GSSI UtilityScan, Quick Start Manual

Page: 41 / 56

UtilityScan Quick Start Guide Page 35
Section 4: Playing Back Data
All UtilityScan data are saved on the tablet so you do not need to be connected to the UtilityScan to play back data. While
you can play back data in ScanEZ, GSSI suggests using the ScanMax app to play back data. Make sure that the desired
Project number is selected in the ScanMax top level setup window.
1
To play back previously saved files from the selected project, select Playback from the antenna connection screen or
Playback Setup from the ScanMax app. You will have the following options in the Menu Carousel:
• Color Table:
Choose from six options.
• Band Filter:
Turn On/Off a filter which downplays or removes horizontal banding resulting from noise.
• Focus:
Turn the Focus Mode On/Off/Plus.
• Zoom:
Toggle a 1,2, or 4 times horizontal stretch for your data.
2
Once you have made your selections for these parameters, tap Files on the left sidebar to bring up the File
Maintenance screen. You will see a list of all saved files in the currently selected project. Tap the box to the left of the
filename you would like to play back. You will see a “check” appear in that box and the Playback button at the left
will light up. Tap Playback. The file will display and you will have the following options in the Menu Carousel:
• Close File:
Close the current file and return to the Playback Setup screen.
• Mark:
Add a mark at the current location of the crosshairs and tag it with a color.
• Gain:
Adjust overall, surface, and deep gains to adjust data visibility.
• Calibrate:
Use Set Depth or Set Dielectric to refine the time to depth calculation.