GSSI UtilityScan, Quick Start Manual, Page: 44 / 56

UtilityScan Quick Start Guide Page 38
Note:
Inserting a new USB drive while the UtilityScan app is running will cause the app to instantly close and return you
to the tablet desktop. Any data file you are currently collecting will be lost.
Once the drive is inserted, tap UtilityScan (if not already open) from the tablet desktop. It is not necessary to have the
antenna nearby and powered up since all the information is stored on the tablet.
1
Tap Playback from the antenna connection screen or Playback Setup from the ScanMax, or Playback from ScanEZ.
2
Tap Files from the left sidebar to open the file browser screen.
3
Select the files you want to copy by tapping the box to the left
of each file name. You can also tap Select All to select all files.
If you have more files than are shown, use your finger or a
stylus to swipe up/down on the list to show more. You can also
sort the files by date by tapping File Order.
4
Once the files are selected, tap Copy to USB. File copying is
done when the status bar disappears. Selecting Copy will
preserve the file on the tablet while selecting Move will copy
the file to the USB and delete it from the tablet. Files are
stored on the USB in a folder named “RADARDATA.”
Delete
files by performing Steps 1-3 and then tapping Delete.