UtilityScan Quick Start Guide
Page 6
Connecting to the UtilityScan with WiFi
1
Make sure that the UtilityScan is turned On and
tap the UtilityScan app icon. After a short splash
screen, you will see the image at the right. This
image shows five UtilityScans are broadcasting
nearby. You will likely see only one entry.
2
The center of the screen will show one entry for
each UtilityScan the app detects. Individual
systems are identified by their serial numbers
which will show after the zeros.
3
Tap the box next to the correct UtilityScan entry
and then tap Connect. The connection will
establish after a few seconds and UtilityScan Main Menu screen will appear.
Note:
The UtilityScan app will remember the last UtilityScan antenna to which it connected. The next time you open
the app, it will auto connect if it detects the last UtilityScan antenna. The connection screen will flash and the go to the
Main Menu screen. If you have multiple UtilityScan antennas, be sure to turn them on and connect one at a time. Once
connected, the UtilityScan antenna will not connect to another tablet until disconnected from the its current tablet.
Summary of Contents for UtilityScan
