NOTE: The dwell time is only adjustable when Preset is selected as the alarm action. When the dwell time is up,
the Dome Camera will go back to the trigger position and recheck the alarm pin status.
EXIT:
After exiting the ALARM SETTING menu, go back to MAIN PAGE 3 to carry on with the setup of the Privacy Mask
function. Thus please skip the next section and go to 5.3.21. PRIVACY MASK to continue the setup of the Privacy
Mask function.
5.3.19. ALARM DETECT
When the Alarm Detect function is activated, the camera will detect movement within a monitoring area and then
send an alarm signal automatically. The flash warning notice "MOTION" will be displayed in the upper left corner
of the screen.
DETECT SWITCH:
This item is used to enable or disable the ALARM DETECT function.
DETECT MODE:
The Motion Mode is set in this section.
- MOTION:
The Motion Detection function allows detecting suspicious motion and triggers alarms when the motion volume in
the detected area reaches/exceeds the determined sensitivity threshold value. The main menu is shown below:
29
English
Summary of Contents for GCA-C0335P
