Grundig GCA-C0335P, Owner'S Manual

Page: 21 / 48

- IMAGE:
IMAGE represents a digital IMAGE FLIP, which enables users to keep tracking objects seamlessly. Under this
mode, almost no delay occurs, in contrast to M.E. mode.
NOTE: The Privacy Mask function will be automatically disabled if the Image Flip function is enabled, and the
screen will show “MASK WILL BE SET OFF.”
- M.E.:
M.E. is a standard mechanical operation. As the Dome Camera tilts to the maximum angle, it will pan 180°, and
then continue tilting to keep tracking objects.
- OFF:
Select this item to disable the flip function.
NOTE: To make the Dome Camera tilt between a specific range, such as -10° to +100°, please go to ANGLE
ADJUSTER (see next section) to set the angle range of the tilt. Otherwise, the camera will tilt 90° as set in the
default setting.
ANGLE ADJUSTER:
This item is for adjusting the camera view angle. The range of the view angle is between -10° and +100°.
SPEED BY ZOOM:
If this item is set to <ON>, the pan/tilt speed will be adjusted by internal algorithm when zooming automatically.
The larger zoom ratio leads to a lower rotation speed.
AUTO CALI. (Auto Calibration):
There is one horizontal and one vertical infrared ray check point in each dome. When the dome camera’s position
is moved during installation or maintenance, the relative distance between the original set point and the check
point can change. Enable the Auto Calibration function, so that the dome will automatically detect the distance
change and reset the point back to the original position.
PASSWORD:
The administrator can activate the OSD Password function for security concerns. Once the function is turned on,
the users are required to enter the password every time when accessing the OSD menu. The Password setting
menu is shown below:
19 English