Grundig GCA-C0335P, Owner'S Manual

Page: 16 / 48

5.3.2. DEFAULT CAMERA
This item is for restoring the camera settings, including Backlight, Focus, AE, WBC, Digital Zoom, Slow Shutter,
Image Inverse and Aperture, to factory defaults. Once one of the parameters mentioned above is modified, the
DEFAULT CAMERA item will turn automatically to <OFF>. Select <ON> to recall the default settings for these
camera parameters.
5.3.3. BACKLIGHT
The Backlight Compensation function prevents the centre object from being too dark in surroundings where
excessive light is behind the centre object.
When you set this item to <ON>, the centre object will be brightened in contrast to the edge of the picture (where
backlight would most likely be located).
After completing the setup of backlight, go back to Main Page 1 and continue to set the focus values.
5.3.4. FOCUS
The Dome Camera’s focus can be operated in two modes: Manual Focus mode and Auto Focus mode.
AUTO:
There are three options available for the AF Mode, including Normal mode, Zoom Trigger (Z. TRIG.) mode and PTZ
Trigger (PTZ TRIG.) mode. The submenu of AUTO is shown below:
- Normal Mode:
In this mode, the camera will stay focussed automatically and continuously in any condition.
- Zoom Trigger Mode (Z. TRIG.):
In this mode, AF is activated at the time when zoom is changed.
- PTZ Trigger Mode (PTZ TRIG):
In this mode, AF is triggered when the Dome Camera is set to pan, tilt or zoom.
- EXIT
＋
SAVE:
Press <YES> to save the selected AF Mode.
14 English