Grundfos Oxiperm Pro OCD-162-10, Installation And Operating Instructions Manual

Page: 3 / 48

3
CONTENTS
Page
1. General safety instructions 3
1.1 Purpose of these operating instructions 3
1.2 Symbols used in this document 3
1.3 Users/target groups 3
1.4 Obligations of the operator 4
1.5 Maintenance and service personnel 4
1.6 Correct usage 4
1.7 Inappropriate usage 4
1.8 Safety and monitoring equipment 4
1.9 Chemicals 4
2. Product description 6
2.1 Application examples 6
2.2 Functional principle 6
2.3 Components of the standard device 7
2.4 System peripheral devices and accessories 8
2.5 Hydraulic connections 9
2.6 Power supply connections and electronic connections 9
2.7 Operating modes 9
2.8 Control and display elements 10
2.9 Access codes 11
2.10 User menu structure 12
3. Transport and packaging 14
3.1 Unpacking the device(s) 14
3.2 Measures in case of transport damage 14
4. Installation 15
4.1 Planning installation 15
5. Operation 16
5.1 Switching on the system 16
5.2 Changing operating mode 16
5.3 Starting operation 17
5.4 Interrupting operation 17
5.5 Continuing operation after an interruption 18
5.6 Flushing 18
5.7 Manually ventilating the dosing pump 20
5.8 Modifying setup 20
5.9 Monitoring the production and dosing process 22
5.10 Changing alarm settings 28
5.11 Changing chemical containers 30
5.12 Fault finding 31
5.13 Calibration 36
5.14 Emergency stop 39
5.15 Switching off the system 39
6. Technical data 40
6.1 Identification 40
6.2 Technical data 40
7. Applicable standards and directives 43
8. Operator’s accessory list 43
9. Dimensional sketch 44
10. Photos 45
11. Disposal 45
1. General safety instructions
1.1 Purpose of these operating instructions
The Grundfos Alldos
Oxiperm Pro
disinfection system is a state-
of-the-art solution, which complies with recognised safety
regulations.
Conformity with applicable standards, directives and laws has
been verified.
For a list of applicable standards and directives, see section
7. Applicable standards and directives
.
Nevertheless, certain risks which cannot be prevented by the
manufacturer are associated with the use of the system.
Purpose of this manual:
•
Inform users of optimum use of the system.
• Warn users of possible residual risks when using the system
correctly, and identify measures that should be taken to avoid
damage.
• Caution users against obvious misuse or inappropriate use of
the system and inform them of the necessary care that must
be taken when operating the system.
For installation, maintenance, servicing and dismantling
information, please see
the separate service instructions.
1.2 Symbols used in this document
Information about possible residual risks can be found:
•
on warning signs located at the installation site
• at the beginning of each section in this manual
• immediately before steps associated with a residual risk.
1.3 Users/target groups
Users are persons who are responsible for operating and
monitoring the
Oxiperm Pro
disinfection system at the
installation location. The system may only be operated by trained
and qualified personnel. Personnel must have appropriate
technical knowledge and be familiar with the basic principles of
measuring and control technology.
1.3.1 Obligations of the users
The users’ obligations:
•
Read this manual before operating the
Oxiperm Pro
disinfection system.
• Be trained by qualified personnel from Grundfos Alldos in the
operation of the system.
• Observe the recognised regulations governing safety in the
workplace and accident prevention.
• Wear appropriate protective clothing in accordance with
national regulations for the prevention of accidents when
operating the system and handling chemicals
(German GUV-V D05).
• Keep secret the user code for the operating software.
1.3.2 User workstation
The
Oxiperm Pro
disinfection system is electronically controlled.
Users and service personnel operate the system via a display
with control and display elements. See section
2.8 Control and
display elements
.
Warning
These operating instructions are also available
on www.Grundfosalldos.com.
Before operating the Oxiperm Pro system, read
these operating instructions.
Warning
If these safety instructions are not observed,
it may result in personal injury!
Caution
If these safety instructions are not observed,
it may result in malfunction or damage to the
equipment!
Note
Notes or instructions that make the job easier
and ensure safe operation.