10
2.8 Control and display elements
Fig. 5
The display and control panel
2.8.1 Using the control panel
2.8.2 Using the display
Once the system is started, the following display level appears in
the display:
Fig. 6
Display level after starting the system
The header indicates the status (here: no process started).
For symbols and numbers for relays, see the table below.
Press [OK] to access the MAIN MENU:
During operation, press [Esc] to access the display level.
Fig. 7
PROCESS RUNNING display level
Fig. 7: 1-5, see table below:
•
6 = water temperature
•
7 = ClO
2
concentration
•
8 = pH value in the sample water.
T
M
03
69
00
45
06
Buttons and LEDs
Functions
[Esc] button
Cancels command, exits menu
[Up] button
Selects the previous menu item or sets
a higher numerical value
[Down] button
Selects the next menu item or sets a
lower numerical value
[OK] button
Confirms the menu selection
[Cal] button
Calibration
[Man] button
Manual operation
"Alarm" LED
Alarm (red)
"Caution" LED
Warning (yellow)
"Cal" LED
Calibration (yellow)
"Man" LED
Manual operation (yellow)
T
M
03
69
01
45
06
MAIN MENU
PROCESS
CONTROLLER
ALARM
SERVICE
SETUP
MAINTENANCE
5
4
3
2
1
T
M
03
69
22
45
06
Message in the
display level
Meaning of the message
PROCESS
RUNNING
ClO
2
production is active.
1
Headers
PROCESS
STOP
ClO
2
production has been
stopped by an alarm.
PROCESS
ABORTION
ClO
2
production has been
aborted by a menu command or
alarm.
FLUSHING
Flushing is started automatically
or manually.
1
Relay for solenoid valve.
Display:
White number on a black
background: relay active.
Black number on a white
background: relay not active.
2
Relays
2
Relay for HCl pump:
display as for 1.
3
Relay for NaClO
2
pump:
display as for 1.
4
Alarm relay:
display as for 1.
5
Warning relay:
display as for 1.
Symbol for relay for the pulse
pause controller.
3
Symbol
Symbol for relay stop for the
pulse pause controller.
.........
24
,
5 °C
pH 7
,
35
5
4
3
2
1
0
,
23 mg/l
1
2
6
7
4/3
5
8
PROCESS RUNNING
6
6
Summary of Contents for Oxiperm Pro OCD-162-10
Page 46: ...46...