Grundfos Oxiperm Pro OCD-162-10, Installation And Operating Instructions Manual

Page: 28 / 48

28
5.10 Changing alarm settings
Fig. 15
User alarm settings
To maintain the factory settings, proceed as follows:
Load the value or range to be checked using [OK], and exit the
menu using [OK] or [Esc].
To set a different value/range, proceed as follows:
If several values or ranges are available, use the [Up] or [Down]
button to select the desired value or range, open it using [OK] and
confirm using [OK].
If only one value or range is available, open it using [OK], use the
[Up] or [Down] button to modify, and confirm using
[OK].
Press [Esc] to exit the menu.
5.10.1 Changing ClO
2
alarm values
1. MAIN MENU > ALARM > [OK].
2. ClO
2
ALARM VALUES > [OK].
Factory setting: ALARM OFF.
3. Use the [Up] button to select ALARM ON > [OK].
The settings are saved.
T
M
03
69
09
45
05
MAIN MENU
ALARM
ClO
2
ALARM VALUES DOS. TIME MONIT.
ON OFF
ALARM VALUE 1 ALARM VALUE 2 HYSTERESIS ALARM DELAY
UPWARD VIOLATION
DOWNWARD VIOL.
ON OFF
ALARM
ClO
2
ALARM VALUES
DOS. TIME MONIT.
EMPTY SIG. RESER.
ClO2 ALARM VALUES
ALARM ON
ALARM OFF
ClO2 ALARM VALUES
ALARM VALUE 1
ALARM VALUE 2
HYSTERESIS
ALARM DELAY