45
10. Photos
Fig. 19
The Oxiperm Pro with components according to fig. 3
Fig. 20
Dismantled
Oxiperm Pro seen from above
11. Disposal
Before dismantling, the system must
be completely rinsed with
water in order to remove the chemicals from the reactor, the
hoses and the pumps. The dosing line must
be placed outdoors
to let residual chlorine dioxide escape.
For environmentally friendly disposal, the operator should
hand
over the
Oxiperm Pro
disinfection system or its parts to a private
disposal system. If there is none in your region, send the
Oxiperm Pro
to the nearest
Grundfos Alldos company.
TM
03
69
59
45
06
Pos.
Components
2 Solenoid
valve
5 NaClO
2
chemical pump
6 HCl
chemical
pump
7 Reaction
vessel
8
Reservoir tank with drain cock
10
Activated carbon filter
13 Dosing
pump
21
Controller using the display and control panel
26 Multi-function
valve
TM
03 696
0 450
6
Pos.
Components
7
Reactor with connections at top
9
Volumetric accumulator for ClO
2
gas
21
Controller using the display and control panel
Note
The Oxiperm Pro disinfection system and its
associated parts must be disposed of in an
environmentally friendly way.
The system may only be dismantled by
authorised and qualified personnel.
The operator is responsible for ensuring an
environmentally friendly disposal.
Subject to alterations.
Summary of Contents for Oxiperm Pro OCD-162-10
Page 46: ...46...
