Automatic water analysis system
GENO-softwatch Komfort
Order no. 145 172 955-inter Edited by: phar-mrie G:\BA-172955-INTER_145_GENO-SOFTWATCH KOMFORT
19
D Installation
1 | General safety information
Please observe the respective country-specific regulations and
directives (e.g. DIN, VDE, UVV) when installing and operating the
system.
1.1 Preliminary work
1. Unpack all system components.
2. Check for completeness and soundness.
Only an authorised expert may install and start-up the system!
2 | Installation/mounting
Please make sure that sufficient space to open the system is
available. This will also make the electrical installation easier and
facilitate future system maintenance and care.
Fig. D-1: Bore diagram
Note:
A drilling template is attached to facilitate the installation.
Note:
To avoid damage to the housing, the
washer must be installed!
