Automatic water analysis system
GENO-softwatch Komfort
Order no. 145 172 955-inter Edited by: phar-mrie G:\BA-172955-INTER_145_GENO-SOFTWATCH KOMFORT
28
3 | Description of the display elements
3.1 Result of analysis
This display has two different colours and indicates the analysis result.
Flashing green:
There is no analysis result as the system has been switched on.
Green:
The water quality is below the set limit value.
Red:
The limit value has been exceeded – however, relay REL 1 has not
yet been activated (suppression of first value).
Flashing red:
The set limit value has been exceeded and relay REL 1 activated.
3.2 Analysis active
Yellow:
The display is illuminated permanently and thus signals that the
analysis is in progress.
Flashing yellow:
The display is flashing and thus signals that the analysis interval
has expired but the start of the analysis has been locked via input IN
(flow controller).
Flashing yellow:
The display is flashing and thus signals that no analyses are started
automatically. The system is programmed to stop the analysis if the
limit value has been exceeded. At the same time, the red display for
the analysis result (refer to programme switches S4 and S5 in
chapter F-4.2.3) is flashing or is illuminated.
Quickly flashing yellow:
The display is flashing with a high flashing frequency and thus
signals that the start of the analysis has been delayed, for example
in order to cool down the sample water prior to the sampling (refer to
the setting of the rotary switch for the delay time in chapter F-4.1.2).
3.3 Lack of indicator
Blue:
The display is illuminated permanently and thus indicates that the
remaining indicator is less than 30 %. The remaining quantity
indicator allows operation for a further 72 hours in the set analysis
interval.
grün
rot
gelb
rot
gelb
blau
green
red
blue
red
yellow
yellow
