Automatic water analysis system
GENO-softwatch Komfort
Order no. 145 172 955-inter Edited by: phar-mrie G:\BA-172955-INTER_145_GENO-SOFTWATCH KOMFORT
31
4 | Adjusting GENO-softwatch Komfort
Work on electrical connections is only allowed be performed by
trained and qualified electrical experts according to the VDE
guidelines or according to the guidelines of a similar local institution.
Caution!
Supply voltage 85 … 264 V AC/47 … 63 Hz.
By means of the little sliding switches S1 – S12, the GENO-softwatch
Komfort is programmed and adjusted to specific operating requirements.
The DIP switches (dual in-line package) are located on an operating
board which is screwed onto the main board. This operating board
must not be removed.
Fig. F-1: DIP switch
In addition, the two 16-step rotary switches for the setting of the
flushing time and the delay time for the start of the analysis are
located.
