![Grizzly G0620 Supplement Manual Download Page 17](http://html1.mh-extra.com/html/grizzly/g0620/g0620_supplement-manual_2266093017.webp)
G0620 Main Control Panel
-15-
Rip Fence Thickness
Calibration
The rip fence can fit on the base in two positions,
as shown in
Figures 27 and 28
. When the fence
is changed from one position to another, the con-
trol panel automatically adjusts the dimensions
shown on the display so the cutting width remains
accurate. The control panel recognizes the fence
positions as A and B, as shown below.
Besides ensuring that the standard fence dimen-
sions are calibrated correctly. The calibration
function can also be used if a sacrificial fence is
attached to the standard rip fence.
�
Figure 27.
Fence position A.
�
Figure 28.
Fence position B.
To calibrate the rip fence thickness:
1.
Turn the control panel
OFF
.
2.
Push and hold the blade width
and CAL
keys, then turn
ON
the control panel. The
display will show A and B dimensions, as
shown in
Figure 29
.
3.
Press the clear key , then type in the exact
dimensions of your fence with the number
keys.
4.
Type in a new dimension in the A line or
press the minus key to activate the B dimen-
sion.
5.
After entering the new dimension, press and
hold the input confirmation .
The numbers you entered are now stored into
the control panel as the correct fence thick-
ness.
�������
����
Figure 29.
Rip fence calibration mode.