44
Menu
Menu
Display
Display
Description of program expansions and operating notes
Description of program expansions and operating notes
Page
Page
•
Swashplate mixer
Mixer ratios for collective pitch, roll and pitch-axis are separately variable (-100% ... +100%), with the exception of
helicopters with only one collective pitch servo.
CLEAR
resets changed values to 61%.
Important:
Ensure that servos are not mechanically obstructed if you set large values.
111
Auxiliary functions
Auxiliary functions
•
•
Fail-safe adjust
In PCM20 mode:
„Time“:
all servos to “hold” mode, or enter a delay time (1, 0.5 or 0.25 sec.) using rotary control, after
which servos 9 and 10 take up the neutral position, and servos 1 ... 8 take up a position defi nable
using
STO
.
“Battery F.S.”:
three possible servo positions can be selected (-75%, 0%, +75%, plus “off”) for servo 1 in fi xed-
wing models and model helicopters.
112
In SPCM20 mode:
Servos 1 ... 8 can be programmed to hold-mode or position mode. Save selected position using
STO
. Servos 9
and 10 remain in hold mode.
114
•
•
Teacher/pupil
After assigning a switch (preferably a momentary switch or kick-button), control functions 1 ... 8 can be transferred
to a Pupil transmitter. All model programming is carried out at the Teacher transmitter. The pupil transmitter’s con-
trol functions must affect the control channels, i.e. the receiver outputs, directly, without any mixers or other set-
tings being involved. The modulation of the Pupil transmitter must be set to PPM! Only stick mode, throttle / coll-
ective pitch reverse and idle trim should be set up to suit the pupil’s preferences.
115
Global functions
Global functions
•
•
Basic settings
Owner’s name:
max. 15 characters (letters, numbers, special symbols). Use rotary control to select
characters from the symbol table on the second screen page.
Preset stick mode:
the stick mode selected at this point is adopted as standard for all
new
model memo-
ries.
Preset modulation:
PCM20 for all “mc” or “DS mc” type PCM receivers (512 steps)
SPCM20 for all “smc” type SPCM receivers (1024 steps)
PPM18 for all PPM-FM receivers to date except DS 24 FM
PPM24 for “DS 24 FM” PPM FM receiver
Expert mode:
„no“:
some menus are suppressed in the multi-function list when a new model is set up;
simplifi es programming for the beginner. Suppression of menus can be reversed in the
»
Suppress Codes
« menu if desired.
“yes”
all mc-22s menus are accessible when a new model is set up.
Preset coll. pitch min.:
Defi nes the collective pitch minimum position of the Ch1 stick – “forward” or “back”.
117
Brief programming instructions
Brief programming instructions
for all fi xed-wing and helicopter programs
Summary of Contents for MC-22S
