11. Select
CHANNEL ON
:
YES
or
NO
Z
X
Select
YES
to set the time period (hours and minutes) during
which the time switch should switch on again.
23 h
Sunrise
ON
OFF
ON
OFF
Sunset
5 h
Z
X
Select
NO
if the night-time switch-off should last to the next
sunset.
23 h
23 h
ON
OFF
ON
OFF
Sunset
Sunset
Channel ON:
YES
12. Enter hour and minute for the
ON
command (+/-)
OK
Z
Z
The program is saved.
Creating a holiday program
A
ON/OFF programming
For CYCLE and PULSE, you also have to set the duration and/or
period.
If ON is set, you can select the days of the week on which the
time switch is switched off during holidays.
The procedure is the same as for creating a weekly program.
Random switching program
1)
The programmed switching command is delayed by a variable (random)
period of 0-30 minutes..
Z
X
Press
OK
to start the random switching program.
Z
Z
RANDOM
flashes.
Finish random switching program
Z
X
Press
DEL
to finish the random switching program.
Z
Z
The timer returns to Automatic mode.
TAXIMODE – Transmission of programs
• A handheld programming device can be used to exchange programs
via the IR interface. To do so, the device must be in the TAXIMODE
and connected to power.
• Press
ESC
to finish the TAXIMODE..
Operation of handheld programming device:
1. Press
PROG
to select the program number.
2. Press
IN
to read in a program.
Press
OUT
to read out a program.
3. Hold the handheld programming device
vertically over the IR interface.
4. Pressing IN or OUT again will start the transmission.
A wrong transmission is shown by Er2.
For further information, see the separate operating manual
“handheld programming device”.
EXT I/P – External input
I/P COUNT – Pulse counter
Select
I/P COUNT
to check the pulse
counter. It will count how many times
the external button was pressed.
Press
RES
to reset the pulse counter
to zero and confirm by pressing
YES
.
EXT O/R – Manual switch
Select
EXT O/R
to assign a channel
to an external button.
Upon pressing the button, an
override switching command will
be executed. It will be in effect
until the next time the button is
pressed or until the next automatic
switching command.
COUNTDOWN – Countdown timer
Select
COUNTDOWN
to set the
time for a countdown timer.
Upon pressing the button, an
ON switching command will be
carried out. It switches the selected
channel ON for the set time.
Pressing the button again will start
the countdown timer again at the
set time.
If a program is already running on the selected channel, no switching
command will be executed! After the time has expired, the timer returns
to Automatic mode.
Shortest ON switching duration: 30 seconds
Longest ON switching duration: 90 minutes
Countdown timer and manual switch cannot be selected at the
same time! The function selected last always applies.
View and edit program
Weekly, yearly, holiday
and astro programs can
be viewed and edited
separately.
• Press
to scroll
through the different
program steps.
• Press
EDT
to edit a
program.
This procedure is
similar to creating a
new program.
Delete program
Delete all programs
• Press
YES
to delete all
programs.
• Press
NO
to delete individual
programs.
Delete individual programs
• Press
to scroll through the
different program steps.
Configuration
ASTRO – Astro settings
1)
Click the
COUNTRY
menu item to
select the desired country and city.
The longitudes and latitudes are
generated automatically.
If the desired city is not included in
the list, you can manually set the
longitudes and latitudes via the
LAT/LON
menu item.
Creating an ASTRO program
1)
The following settings are possible:
SUNSET ON
SUNRISE OFF
The time switch switches ON at sunset and
switches OFF at sunrise
SUNSET OFF
SUNRISE ON
The time switch switches OFF at sunset and
switches ON at sunrise
SUNRISE PULSE
The time switch switches ON at sunrise for a
certain time (pulse)
SUNSET PULSE
The time switch switches ON at sunset for a
certain time (pulse))
SUNRISE
SUNSET
PULSE
The time switch switches ON at sunrise and
sunset for a certain time (pulse)
Sunset ON / Sunrise OFF
1. Confirm
SUNSET ON / SUNRISE OFF
by pressing
OK
.
Z
Z
Free memory locations are briefly displayed.
2. When prompted, select Astro-settings.
3. When prompted, select channels and confirm by pressing
.
OK
Z
Z
The weekday display is flashing.
ON command:
4. Select the desired days and confirm by pressing
OK
5. Enter start date (month and day) in the relevant box (+/-)
OK
6. Enter stop date (month and day) in the relevant box (+/-)
OK
7. Enter minutes for the
OFFSET
(+/-)
OK
Offset can be used to offset the ON and OFF switching times of
the Astro program. This is done in order to adapt them to the
local conditions.
Example
SUNSET ON / SUNRISE OFF
:
Offset = + 00:15 The time switch switches ON 15 minutes after
the calculated sunset and switches OFF 15 minutes after the
calculated sunrise.
8. Select the
OFF PERIOD: YES
or
NO
Z
X
Select
YES
to set the time period (hours and minutes)
during which the time switch should switch off, e.g.
night-time switch-off from 23 - 5 h.
Z
X
Select
NO
to set no OFF period.
OFF period:
YES
9. Enter hour and minute for the OFF command (+/-)
OK
10. When prompted, select desired days and confirm by pressing
OK
LIGHT – Background illumination
• Select
FIX ON
to set
the background lighting
permanently.
• Select
2 MIN
if you want the
background lighting to be
automatically switched off 2
minutes after your last input.
PIN – Set PIN
• Press
+ -
to set a numeric
value.
• Press
OK
to set the next number.
• Select
NO PIN
, to remove the
PIN.
HCOUNTER – Set hour counter
• Press
to select the
channels.
• Select
REVIEW
to check the hour
counter.
• Press
to scroll through the
different program steps
• Press
RES
to reset the hour
counter for this channel.
HCOUNTER – Set service counter
You can set the number of
operating hours after which a
service message is to appear. It
will be shown on the display as
soon as the counter has reached
the number of hours set by you.
• Press
to select the
channels.
• Press
+ -
to set a numeric
value.
Maintenance and repair
Battery change
Before changing the battery, the device must be disconnected from the
power supply! Date and time will be lost!
1. Lift the battery compartment using a
screwdriver.
2. Take the battery out of the support.
3. Insert new (Lithium battery type CR2450)
battery into support.
Observe polarity of the battery!
4. Push battery support downward until it
engages.
5. Dispose of the battery in an
environmentally friendly manner.
Disposal / Recycling
Dispose of the packing material correctly according to legal
requirements and regulations.
Observe the following notes for disposing of defective system
components or the system after its service life:
• Dispose of appropriately, i.e. separating the parts to be disposed of
according to material groups.
• Do not throw electrical and electronic components in the bin. Bring
these parts to the recycling centers.
• Always ensure the environmentally sound disposal conform to the
state-of-the-art environment protection, recycling and disposal
engineering.
Automatic/Manual mode
• Manual switch: Duration ON / Duration OFF / OVR / Automatic mode
• Left button = channel 1 / Right button = channel 2
Press 1x = FIX ON = Duration ON
Press 2x = FIX OFF = Duration OFF
Press 3x = OVR = Override mode
Press 4x = Automatic mode
Override mode
The Override function (temporary program
overwrite) allows the user to switch ON or OFF early. This depends on
the current channel status. The Override function applies only to the
current program and remains active until the next program change.
After that, the timer returns to Automatic mode.
1)
Function not available for all products.
2)
Available only if individual days have been selected for the ON
command.
4)
Only appears when the Astro-settings are not set.
ESC OK
1 6 12 18 24
15:26
1
1 OFF ON 2
2
OVR
FIX
ESC OK
1 6 12 18 24
15:26
1
1 OFF ON 2
2
MINUTES OFFSET
OK
OFF PERIOD
HOUR CHL OFF
MIN CHL OFF
YES
OK
OK
CHL ON
HOUR CHL ON
YES
OK
MIN CHL ON
SAVED
OK
MENU
PROGRAM
NEW
HOLIDAY
ON/OFF
PULSE
CYCLE
OFF
OK
OK
OK
A
RANDOM
OK
RANDOM
DEL
MENU
RANDOM
OK
RANDOM
OK
7:00
20:00
OFF
ON
7:30
20:30
MENU
CONFIG
OK
TAXIMODE
LIGHT
PIN
HCOUNTER
EXT I/P
ASTRO
1)
TAXXI
out
prog
in
RS232
EXT I/P
I/P COUNT
OK
OK
I/P
00000
OK
EXT I/P
EXT O/R
OK
OK
SELECT
CHANNEL
1)
OK
EXT I/P
COUNTDOWN
OK
OK
SELECT CHL
1)
OK
DURATION
MIN:SEC
OK
DELETE
DELETE ALL
ONO PO01
OK
NO
DEL
CONFIRM
YES
MENU
PROGRAM
DELETE
DELETE ALL
CONFIRM
OK
OK
YES
YES
MENU
PROGRAM
REVIEW
ALL
ONO P001
CHANNELS
1
OK
OK
OK
EDT/OK
ASTRO
COUNTRY
OK
OK
OK
UNITED KINGDOM
LONDON
OK
PIN
PIN
OK
OK
PIN
0000
OK
LIGHT
FIX ON
2 MIN
OK
OK
HCOUNTER
SELECT
OK
OK
SELECT
CHANNEL
1)
OK
HCOUNTER
SERVICE
OK
OK
CHANNEL
1)
OK
HOURS
00000 H
SERVICE
OK
MENU
PROGRAM
NEW
ASTRO
SUNSET ON
SUNRISE OFF
OK
OK
OK
OK
SUNSET ON
SUNRISE OFF
OK
ASTRO
4)
OK
SELECT CHL
1)
OK
DAY CHL ON
MONTH START
DAY START
MONTH END
DAY END
OK
OK
OK
OK
OK
ON/OFF
OK
SELECT CHL
1)
DAY CHL ON
MONTH START
DAY START
MONTH END
OK
OK
OK
OK
OK
DAY END
OK
HOUR CHL ON
MIN CHL ON
OK
OK
DAY CHL OFF
2)
OK
HOUR CHL OFF
MIN CHL OFF
SAVED
OK
OK
talento_471-472-791-792-881-882_pro_EN_A3.indd 2
16.02.2012 10:40:04
