manualshive.com logo in svg

GRASS VALLEY KMV-3901, Installation & Service Manual, Page: 49 / 138

Share
Download
GRASS VALLEY KMV-3901 Installation & Service Manual Download Page 49

49

KMV-3901/KMV-3911

Installation & Service  Manual

• If you have Windows 7, or Windows 10, shortcuts (

) are added to your desktop 

and to the Start menu (under 

All Programs

).

• If you have Windows 8.1, or Windows 8, Router Control will appear on your 

desktop, in the Apps view with all other installed applications on your PC 
(Windows 8.1), or in your Start screen (Windows 8).

Once the installation has completed, the Router Control main application window 
appears. The application automatically connects to your multiviewer. The main 
window lists all logical routers configured within your multiviewer system, in addition 
to the 

KX Router

 logical router.

4 In 

Router Control

, click the router you want to control, and then click 

Open

.

Depending on your Windows Firewall settings, a security alert may appear.

• Click 

Allow access

 to unblock the application.

The Matrix View application window opens.

Summary of Contents for KMV-3901











































































































































Reviews:

No comments