GRASS VALLEY KMV-3901, Installation & Service Manual, Page: 123 / 138

123
KMV-3901/KMV-3911
Step-by-Step Configuration
To configure a cascade room:
1 In XEdit, while connected to the multiviewer that will output directly to the monitor
wall (i.e. the multiviewer whose HDMI outputs are connected to the display monitors),
open the room you wish to configure.
2 Click a first head. In the Properties pane, its name appears in the Output head box.
• In the case of a cascade with three multiviewers, select the first multiviewer (i.e. the
one farthest from the monitor wall) from the Layer 3 head (for cascade
configuration) list:
and then select the next multiviewer from the Layer 2 head (for cascade
configuration) list:
Note:
If the room does not exist yet, create it by adding the appropriate
number of displays, and then assign heads from the current multiviewer to
the displays in the usual fashion.