GRASS VALLEY KMV-3901, Installation & Service Manual, Page: 37 / 138

37
KMV-3901/KMV-3911
Installation & Service Manual
From iControl to multiviewer
Between multiviewer and remote control panel
The following ports, used for communications to/from RCP-200 and Kaleido-RCP2 control
panels, are open by default on all Kaleido Software systems:
From multiviewer to peripheral devices
5120 UDP On multicast 230.8.8.9 for RCP2
7572 UDP On multicast 230.8.8.8 for “keep-alive” (heartbeat)
7571 UDP For “keep-alive” (heartbeat)
Port Used for Transport Notes
4160 Java Jini TCP Responsible for discovery and communications between
devices/services on a network.
32768–
65535 Java RMI TCP Remote Method Invocation (client/server communication).
Dynamic Allocation of ports. Required for communication
between client and Application Server. This range can be
restricted to match specific security requirements. A
minimum of 4000 ports should be allocated.
Port Used for Transport Notes
5120 RCP2 TCP Used to listen for Kaleido discovery packets
10000 TCP For RCP2 protocol
10001 TCP For RCP2 protocol
5120 UDP On multicast 230.8.8.9 for RCP2 protocol
5121 UDP For RCP2 protocol
80 HTTP TCP Used by the RCP-200 to obtain information from the
multiviewer’s system database
13000 TCP Used by the RCP-200 to control the multiviewer via the
gateway
Port Used for Transport Notes
25 SMTP TCP Simple Mail Transfer Protocol, for e-mail alerts.
8851 AlVelte TCP Used to obtain information from Plura
(AlVelte) Studio Production Timer (SPT)
systems.
5100 GPI-1501 TCP Used to obtain information from GPI-1501 General
Purpose Interface I/O modules.
a
8910
b
TSL (network) TCP Used to obtain information from TSL devices that
use the TSL UMD version 5.0 protocol.
Port Used for Transport Notes