![background image](http://html.mh-extra.com/html/graco/promix-pd3k-plus/promix-pd3k-plus_operation_2251575077.webp)
Recipe
Recipe
Recipe Screen
Screen
Screen 2
2
2
Figure 51 Valid Recipe Screen 2
Figure 52 Invalid Recipe Screen 2
Flush
Flush
Flush Sequence
Sequence
Sequence
Enter the desired flush sequence (1-10). For hard
to flush colors, select a longer sequence. The flush
sequence applies only to cleaning of the pumps.
Each component pump used in the recipe that has
color change may have a unique flush sequence
assigned. (see
)
Purge
Purge
Purge Phases
Phases
Phases
Select the number of segments (0-6) for flushing of
the mixed material out the gun. Each segment will
flush out a particular component’s fluid hoses from
the remote color change valves out the gun.
NOTE:
NOTE:
NOTE: To skip purging all together, set the number
of purge phases to 0.
Purge
Purge
Purge Sequence
Sequence
Sequence
For each phase of the total purge cycle, select the
component that will be flushed and the desired
purge sequence (1-10). The purge sequence applies
only to cleaning out the mixed material hoses
and remote hoses feeding mix manifolds. (See
Fill
Fill
Fill Sequence
Sequence
Sequence
Enter the order of filling of the remote hoses up to
the mix manifold(s) with material. Setting the same
number indicates filling in parallel. Unless there
are materials that are incompatible and need to be
filled in sequence, it is recommended to leave these
values at 1 for each component.
3A6287E
77