![background image](http://html.mh-extra.com/html/graco/promix-pd3k-plus/promix-pd3k-plus_operation_2251575119.webp)
Spray
Spray
Spray Screen
Screen
Screen
The Spray screen provides the same information
and operating capabilities as with a single spray
device (see
). In addition,
the Spray screen shows the contents of each spray
device, and allows the user to switch control among
the spray devices. (The active spray device is that
which is, or was, most recently spraying or loading
mixed material, and is highlighted on the left side of
the screen.) If manual override is enabled, and the
system is in Standby, the user may select Gun
Gun
Gun and
enter the number to be the active spray device. This
provides the ability to purge a spray device that is
currently inactive but loaded with mixed material that
has an expired potlife.
Figure 96 Spray Screen
Fill
Fill
Fill Screen
Screen
Screen
The Fill screen operates the same as with a single
spray device (see
).
NOTE:
NOTE:
NOTE: When filling a line, it is important to know
and trigger the appropriate spray device to which
the material is assigned to avoid over-pressuring the
system.
When filling a line with a component that is common,
the user will also need to select one of the spray
devices. The system will open the appropriate valves
and fill material out the selected spray device.
Figure 97 Fill Screen Common Component B
3A6287E
119