Spray
Spray
Spray Screen
Screen
Screen
NOTE:
NOTE:
NOTE: In normal operating mode, controlled by a
PLC, the Spray Screen is display only. No changes
can be made. This section provides information
about the Spray Screen if manual override is enabled
on
. The screens show a
system in manual override mode.
The Spray screen includes the following information:
• Active Recipe (can be changed on this screen)
• Target Ratio
• Actual Ratio
• Target Pressure (if Pressure Mode is selected
on
) or Target Flow (if
Flow Mode is selected). Target pressure or flow
can be changed on this screen).
• Actual Pressure
• Actual Flow
• Potlife Remaining
• Gun Animation
In addition, the Spray screen includes three soft keys:
Press to put the system in
Standby.
Press to spray mixed material.
Press to purge the gun.
When the system is configured for solvent push, the
purge soft key changes to the solvent push soft key
while in Mix mode.
Press to initiate solvent push.
NOTE:
NOTE:
NOTE: The Target Ratio and Actual Ratio will
show the selected ratio format, and on the line
below, each of the component ratio values. The
ratio format is selectable for each recipe. (See
Figure 21 Spray Screen, in Standby Mode
Figure 22 Spray Screen, in Mix Mode
Figure 23 Spray Screen, in Idle Mode
Figure 24 Spray Screen, in Mix Mode, Solvent Push
Enabled
62
3A6287E
