![background image](http://html.mh-extra.com/html/graco/promix-pd3k-plus/promix-pd3k-plus_operation_2251575027.webp)
Operation Using a Programmable Logic Controller (PLC)
Network
Network
Network Communication
Communication
Communication I/O
I/O
I/O Data
Data
Data Map
Map
Map
The PD3K+ has PLC Diagnostic Screens built into
the software that assist in the system integration
process. See
.
ProMix
ProMix
ProMix PD3K+
PD3K+
PD3K+ Network
Network
Network Outputs
Outputs
Outputs
The ProMix PD3K+ Network Outputs are Read-Only and should be treated as inputs to a PLC or other networking
device. These registers provide various system and component status, measurement, and set point values. See
Network Output Data Map (Read Only), page 31
.
OUTPUT
OUTPUT
OUTPUT REGISTER
REGISTER
REGISTER 00:
00:
00: Current
Current
Current System
System
System Mode
Mode
Mode
The Current System Mode register contains a number that indicates the current operation mode of the PD3K+ system.
Number
Number
Number
Operation
Operation
Operation Mode
Mode
Mode
Description
Description
Description
1
Pump Off
The pumps are currently powered down and the system is not in
operation.
2
Recipe Change
The system is in the process of a color change sequence.
3
Recipe Change: Purge A
The system is purging material A as part of a recipe change.
4
Recipe Change: Purge B
The system is purging material B as part of a recipe change.
5
Recipe Change: Purge C
The system is purging material C as part of a recipe change.
6
Recipe Change: Purge D
The system is purging material D as part of a recipe change.
7
Recipe Change: Fill
The system is filling the hose from the remote valves to the mix manifold
with material as part of a recipe change.
8
Mix Fill Stage 1
The system is mixing material at ratio through the first mix manifold
of the fluid stream.
9
Mix Fill Stage 2
The system is mixing material at ratio through the second mix manifold
of the fluid stream.
10
Mix Fill Stage 3
The system is mixing material at ratio through the third mix manifold
of the fluid stream.
11
Mix
The system is currently mixing/spraying material.
12
Mix Idle
The system has paused mix operation due to the absence of a gun
trigger signal.
13
Purge A
The system is purging material A while in Standby.
14
Purge B
The system is purging material B while in Standby.
15
Purge C
The system is purging material C while in Standby.
16
Purge D
The system is purging material D while in Standby.
17
Standby: Fill Ready
The system has a valid recipe loaded in the pumps, but not in the gun.
18
Standby: Mix Ready
The system has a valid recipe loaded out to the gun.
19
Standby: Mix Not Ready
The system requires that a recipe change operation be completed.
20
Standby: Alarm
The system has an active alarm.
21
Line Filling/Flushing
The system is filling/flushing a color change hose between the outlet
valves and remote valves.
22
Pump Prime/Flush
The system is priming/flushing a pump.
23
Maintenance/Calibration
The system is currently in a maintenance or calibration mode.
24
Mix: Solvent Push
The system is currently mixing/spraying with solvent push engaged.
3A6287E
27