![background image](http://html.mh-extra.com/html/graco/promix-pd3k-plus/promix-pd3k-plus_operation_2251575072.webp)
System
System
System Screen
Screen
Screen 4
4
4
System screen 4 sets the following system operating
parameters.
Figure 43 System Screen 4
NOTE:
NOTE:
NOTE: If the fluid stream configuration has any
invalid entries the fields will indicate that by being
highlighted red, and the system will prevent the user
from loading recipes or mixing with that fluid stream.
Figure 44 System Screen 4, Invalid Configuration
Number
Number
Number of
of
of Guns
Guns
Guns
Enter the number of separate fluid streams
if more than a single spray device is
required (with a maximum of three). See
Appendix B: Multiple Guns, page 118
.
Gun
Gun
Gun
Select which fluid stream/gun to which the content
of the page applies. Each gun must be set up
individually.
NOTE:
NOTE:
NOTE: The Gun
Gun
Gun selection field becomes enabled
when the Number
Number
Number of
of
of Guns
Guns
Guns field is set to a value that
is greater than 1.
Number
Number
Number of
of
of Stages
Stages
Stages
Enter the number of mixing stages that are required
for the fluid stream.
Stage
Stage
Stage #
#
# Manifold
Manifold
Manifold
Select the type of manifold used at each mixing point
of the fluid stream. The options are Remote Mix,
Three Port, Mix at Belt, and None.
• Remote Mix is a two-inlet port manifold.
• Three Port is a three-inlet port manifold.
NOTE:
NOTE:
NOTE: Confirm the material chemistries will
support three-in-one mixing before choosing this
manifold.
• Mix-at-Belt is a two-inlet port manifold with handle
manipulation for spraying/flushing.
NOTE:
NOTE:
NOTE: The mix-at-belt manifold can only be
selected as the manifold for the last stage of
the fluid stream because it requires manual
manipulation. If selected as any other stage, the
manifold selections will be shown as invalid.
NOTE:
NOTE:
NOTE: The mix-at-belt manifold cannot be selected
for use with a 4K recipes.
• None may be chosen for a 1K fluid stream.
NOTE:
NOTE:
NOTE: None may only be selected when the
number of stages is 1.
Stage
Stage
Stage #
#
# Components
Components
Components
Select the components that are mixed at each mixing
stage of a fluid stream.
NOTE:
NOTE:
NOTE: Each system component can only be used
once in the fluid stream. If a component is used more
than once, the component selections will be shown
as invalid.
72
3A6287E