![background image](http://html.mh-extra.com/html/graco/promix-pd3k-plus/promix-pd3k-plus_operation_2251575100.webp)
Mix
Mix
Mix Errors
Errors
Errors
Code
Code
Code
Type
Type
Type
Description
Description
Description
Problem
Problem
Problem
Cause
Cause
Cause
Solution
Solution
Solution
Solvent flow switch is
stuck in flow position.
Clean or replace switch.
F7S1
Alarm
Flow
Detected
Solvent Gun
The solvent flow switch
is indicating unexpected
solvent flow.
There is a leak through
the solvent cutoff valve.
Check for leaks and
repair valve.
One or both solvent flow
switches are stuck in flow
position.
Clean or replace the
switch(es).
F7S2
Alarm
Flow
Detected
Solvent Mix
The solvent flow switches
indicate that both are
flowing solvent at the
same time.
There is a leak through
one or both of the solvent
cutoff valves.
Check for leaks and
repair valve(s).
Purge process was not
completed.
Make sure purge process
is allowed to complete.
QP1#
Alarm
then
Devia-
tion
Potlife
Expired
Stage 1 -
Gun #
Potlife time has expired
before the system has
moved the required
amount of material
(potlife volume) through
the stage 1 mixed
material line.
Solvent supply shut off or
empty.
Verify solvent supply is
available and on, supply
valves are open.
Purge process was not
completed.
Make sure purge process
is allowed to complete.
QP2#
Alarm
then
Devia-
tion
Potlife
Expired
Stage 2 -
Gun #
Potlife time has expired
before the system has
moved the required
amount of material
(potlife volume) through
the stage 2 mixed
material line.
Solvent supply shut off or
empty.
Verify solvent supply is
available and on, supply
valves are open.
Purge process was not
completed.
Make sure purge process
is allowed to complete.
QP3#
Alarm
then
Devia-
tion
Potlife
Expired
Stage 3 -
Gun #
Potlife time has expired
before the system has
moved the required
amount of material
(potlife volume) through
the stage 3 mixed
material line.
Solvent supply shut off or
empty.
Verify solvent supply is
available and on, supply
valves are open.
Mix manifold not set to
spray position.
Set manifold to spray.
Spray gun was not
triggered.
Allow flow through gun
during fill process until
the fill complete LED
stops flashing.
SND1
Alarm
Mix Fill
Incomplete
The system timed out
before the mix fill cycle
loaded the gun with
mixed material.
Restrictions in mixer,
manifold, or spray gun.
Fix restrictions.
100
3A6287E