![background image](http://html.mh-extra.com/html/graco/promix-pd3k-plus/promix-pd3k-plus_operation_2251575071.webp)
System
System
System Screen
Screen
Screen 3
3
3
System screen 3 sets the following system operating
parameters.
Figure 42 System Screen 3
Stall
Stall
Stall Test
Test
Test Pressure
Pressure
Pressure
Set the minimum stall test pressure. The setting
should be approximately 50 psi (0.35 MPa, 3.5 bar)
higher than the highest inlet pressure.
NOTE: If the material supply pressure at the pump
inlet is greater than 90% of the Stall Test Pressure, the
system will generate an alarm and will not complete
the stall test. See
Pump
Pump
Pump Stall
Stall
Stall Test
Test
Test
Set the duration for the pump stall test. See
.
Maximum
Maximum
Maximum Leak
Leak
Leak Rate
Rate
Rate
Enter the maximum allowable leak rate for a pump
stall test.
3A6287E
71