Appendix
Appendix
Appendix B:
B:
B: Multiple
Multiple
Multiple Guns
Guns
Guns
A ProMix PD3K+ Automatic system normally
operates with a single spray device, but may be
configured to used multiple (up to three maximum)
spray devices. Having multiple spray devices has
the advantage of very fast color changes; the system
could have a recipe loaded in each spray device and
could then switch between them almost instantly.
The PD3K+ will also track potlife time for multiple
mixed recipes.
The Multiple Guns operation mode may be enabled
on System Screen 3 by changing the Number of
Guns to greater than 1.
Each component in the system must be assigned to
a single spray device. Assignment of the component
to a spray device is done on the Pump Screen 4
by entering the spray device number next to the
component number.
Figure 93 Pump Screen 4 – Material Assignment
Components B, C, or D may be assigned to a single
spray device, shared among multiple spray devices
(common), or a mix of both. Only one component per
pump may be configured as Common, and because
each assignment requires a remote valve, the total
number (including each common assignment) cannot
exceed eight. To configure a component as common
to multiple spray devices, check the Common
Common
Common box
and select all appropriate spray devices.
Figure 94 Pump Screen 4 Component B
Figure 95 Pump Screen 4 Component B Common
Recipes can only be set up to use components
that are assigned to the same spray device. If
the spray device assignments do not match,
the recipe will be invalidated and disabled. See
for more information on
invalid recipes.
118
3A6287E
