Graco 95G104, Manual

Page: 37 / 50

Run Mode
3A8848A 37
Run Mode
Time Control
After setup is complete, the G5 automatically begins to
run the OFF Time sequence (F
IG
. 31).
• The G5 runs the programmed OFF sequence.
(Notice the OFF Time LED on the display lights and
the OFF Time counts down on the display.)
• The example shown in F
IG
. 31 shows an OFF Time
of 1 hour and 32 minutes before the lubrication
cycle begins.
• When the OFF Time count reaches zero, the G5
Automatic Lubrication Pump turns the pump on
and it runs for the programmed ON Time cycle (F
IG
.
32).
(Notice the ON Time LED is now illuminated on the
display.)
• The example shown in F
IG
. 32 shows an ON Time
of 8 minutes and 42 seconds before the lubrication
cycle ends.
• When the ON Time count reaches zero, the pump
shuts off again and the system again runs OFF
Time cycle and the OFF Time LED is now again illu -
minated (F
IG
. 31).
This sequence repeats itself until the device is
reprogrammed or an alarm occurs.
Manual Run Cycle
To run an extra (non-programmed)
lubrication cycle, push the Manual Start
button.
F
IG
. 31
ON
OFF
!
HH MM SS ##
MM : SS HH : MM
F
IG
. 32
ON OFF
!
HH MM SS ##
MM : SS HH : MM