Gotting HG G-98810-C, Technical Description

Page: 17 / 73

Components and Operation
HG G-98810-C
English, Revision 05, Date: 28.11.2016 17
4.2.2 Turn-on characteristics
Upon applying the operating voltage, the antenna requires 10 seconds startup time.
During this period, it is possible to start a firmware update (also refer to section 4.2.4
on page 27).
Following this period, the actual program starts. If configured accordingly (also refer
to Figure 16 on page 38), the transmission coils will be automatically tuned. This pro-
cedure takes another 16 seconds.
4.2.3 Interfaces
4.2.3.1 Serial (RS 232)
The serial output may be configured in various ways. The transmission rate is adjust-
able at 19200 or 38400 Bd, the output protocol may be chosen as either „Montir only“,
„transparent“ or „3964R“, the content of the output telegrams is configurable for the
last two. From a parameter list the required parameters may be selected.
4.2.3.1.1 List of the system data which can be output
One Telegram consists of max. 21 user bytes. The minimum update rate at 19200 Bd
is then calculated as follows:
Figure 11
Formula: minimum update rate
As the transmission is binary, it is possible to add further (DLE) characters to the pro-
cedure when using the 3964R-procedure.
All multiple-byte variables are output either with HighByte first or LowByte first (adjust-
able)!
The 8 bit check sum is only output when using the transparent protocol and includes
the start pulse. The start pulse, as well as the check sum (protocol transparent), can-
not be removed from the data block.
21
Byte
Telegram
------------------------- 11
Bit
Byte
------------ 19200
Bit
s
-------
 
12
ms
Telegram
------------------------- =