Gorilla Playsets 1500KWR, Manual

Page: 86 / 188

1: PLACE THE CENTER DECK SUPPORT ASSEMBLY ON TOP OF THE 4 X 4 X 70" UPPER LEVEL UNDER DECK
SUPPORT. THE 4 X 4 X 59-1/2" LOWER LEVEL CENTER POST SHOULD FIT INSIDE THE CENTER DECK SUPPORT
ASSEMBLY.
2: MAKE THE CENTER DECK SUPPORT ASSEMBLY LEVEL WITH THE CENTER DECK SUPPORTS. THE END OF THE
CENTER DECK SUPPORT ASSEMBLY SHOULD BE FLUSH TO THE SIDE OF THE LOWER LEVEL CENTER POST.
3: ATTACH THE CENTER DECK SUPPORT ASSEMBLY TO THE 4 X 4 X 59-1/2" LOWER LEVEL CENTER POST WITH
5/16" X 3-1/2" LAG SCREWS AND 5/16" WASHERS.
4: CENTER THE CENTER DECK SUPPORT ASSEMBLY ON TOP OF THE 4 X 4 X 70" UPPER LEVEL UNDER DECK
SUPPORT. LEAVE AN EQUAL SPACE ON EACH SIDE OF THE CENTER DECK SUPPORT ASSEMBLY. THE END OF
THE CENTER DECK SUPPORT ASSEMBLY SHOULD BE FLUSH TO THE OUTSIDE OF THE REAR CORNER POSTS.
5: FASTEN THE CENTER DECK SUPPORT ASSEMBLY TO THE 4 X 4 X 70 UPPER LEVEL UNDER DECK SUPPORT
WITH A 3/8" X 5" LAG SCREW AND A 3/8" WASHER.
6: FASTEN THE BOTTOM HOLES OF THE SIDE SANDBOX BOARDS/REAR SANDBOX BOARD TO THE REAR
CORNER POSTS WITH 5/16" X 4-1/2" HEX BOLTS AND 5/16" WASHERS.
STEP 26: CENTER DECK SUPPORT ASSEMBLY
INSTALLATION AND LAGS
LEVEL WITH EACH OTHER
FLUSH
5/16" WASHER
5/16" X 3-1/2" LAG SCREW AND
SIDE SANDBOX BOARDS
AND REAR SANDBOX
BOARD LAGS.
5/16" X 3-1/2" LAG SCREW
WITH 5/16" WASHER (BOTH SIDES)
ENDS FLUSH TO
FRONT FACE OF POST
WITH 3/8" WASHER
3/8" X 5" LAG SCREW
CENTER DECK SUPPORT
ASSEMBLY
(CENTER IT BETWEEN THE
REAR CORNER POSTS.)
78