A
FASTEN EACH BRIDGE RAIL TO THE CORNER POST WITH 5/16" X 3-1/2" LAG SCREWS WITH 5/16" WASHERS.
C
B
1: PLACE THE TOP SURFACE OF THE UPPER TWO 2 X 4 X 66" BRIDGE RAILS 5-1/2" BENEATH THE TOP SURFACE
OF THE TOP PANEL BOARD. THE COUNTERSUNK HOLE IN THE END OF THE BRIDGE RAIL SHOULD FACE THE
INSIDE. FASTEN THE BRIDGE RAIL TO THE CORNER POST WITH 5/16" X 3-1/2" LAG SCREWS WITH 5/16"
WASHERS.
2: MEASURE 16" FROM THE TOP OF EACH BRIDGE RAIL AND MAKE A PENCIL MARK ON THE INSIDE OF THE
CORNER POSTS.
3: PLACE THE BOTTOM OF EACH LOWER 2 X 4 X 66" BRIDGE RAIL ON THE MARK ON THE CORNER POST.
D
STEP 13: BRIDGE RAILS
FRONT
FACE THE INSIDE IN
EACH END.
OF
HOLES FACE
5/16 X 3-1/2"
5/16" WASHER
TOWER
COUNTERSUNK HOLES
2 X 4 X 66"
BRIDGE RAIL
(COUNTERSUNK
TOP PANEL BOARD
LAG SCREW
THE INSIDE)
NOTE: SOME BOARDS
HAVE BEEN OMITTED
FROM THE PICTURE
FOR CLARITY.
BRIDGE RAIL
16.00
5.50
153
Summary of Contents for 1500KWR
