ROOF - LEFT
LAG POST WOOD
4 X 4 X 60-1/4"
ROOF - RIGHT
LAG POST WOOD
SCREWS AND 3/8" WASHERS.
5: ATTACH EACH LAG POST TO THE MIDDLE CORNER POST WITH 3/8" X 3-1/2" LAG
ONE DOES NOT HAVE.
HERE THAT THE LEFT
THIS POST HAS A HOLE
1: TWO 4 X 4 60-1/4" LAG POSTS WILL BE USED TO EXTEND THE MIDDLE CORNER POSTS TO
ACCEPT THE UPPER LEVEL ROOF.
2:
MAKE SURE TO INSTALL THE T-NUTS INTO THE LAG POSTS TOP HOLES AS SHOWN IN THE
DRAWING BELOW BEFORE MOUNTING IT TO THE MIDDLE POSTS.
3: REST THE BOTTOM OF EACH LAG POST ON TOP OF THE 2 X 6 X 70 BACK PANEL BOARD.
4: CENTER EACH LAG POST DIRECTLY OVER THE CENTER OF THE MIDDLE CORNER POSTS.
4 X 4 X 60-1/4"
STEP 21: LAG POSTS
T-NUT
T-NUT
3/8" WASHER
3/8" X 5"
LAG SCREW
2 X 6 X 70
BACK PANEL BOARD
73
Summary of Contents for 1500KWR
