7
1.
Insert the Front Base (94) into the Base (1).
Then, insert two M8 x 63mm Carriage Bolts (87)
up into the indicated holes in the Base.
Note: It
may be helpful to place a piece of tape over
the bolt heads to hold them in place.
IMPORTANT: To make assembly easier,
read the assembly tips on page 6.
Frame Assembly
1
1
87
Holes
94
2. Attach the Lower Weight Guides (25) and the
Base (1) to the Stabilizer (2) with two M10 x
67mm Bolts (71), two M10 Washers (57), and two
M10 Locknuts (56);
firmly tighten the Locknuts.
Insert the Upper Upright (3) into the Lower
Upright (93). Attach the Upper Upright with an
M10 x 65mm Bolt (97), two M10 x 20mm Screws
(95), four M10 Washers (57), and an M10
Locknut (56).
Attach the Lower Upright (93) to the Base (1) with
the two indicated M8 x 63mm Carriage Bolts (87)
and two M8 Locknuts (58).
Do not tighten the
Locknuts yet.
2
87
56
58
93
1
58 71
71
2
57
57
3
95
57
57
25
25
97
57
57
56