15
17. Apply grease to an M8 x 22mm Shoulder Bolt (65).
Attach the Arm Cable (54) to the indicated Cable
Pivot (39) with the M8 x 22mm Shoulder Bolt (65)
and an M8 Locknut (58).
17
58
65
39
Grease
18.
See the CABLE DIAGRAM on page 25 and
identify the Low Cable (53).
Route the Low Cable (53) through the Leg Lever
(8) and the Front Leg (7).
Attach a 90mm Pulley (48) inside the Leg Lever
(8), over the Low Cable (53), with an M10 x
67mm Bolt (71), two M10 Washers (57), two
12mm Spacers (52), and an M10 Locknut (56).
19. Attach a 90mm Pulley (48) inside the Front Leg
(7), over the Low Cable (53), with an M10 x
67mm Bolt (71), two M10 Washers (57), two
12mm Spacers (52), and an M10 Locknut (56).
18
8
7
53
52
52
57
57
48
71
56
19
52
57 71
7
53
48
54
52
57
56
