![background image](http://html1.mh-extra.com/html/golds-gym/30321-0/30321-0_user-manual_2239688006.webp)
6
ASSEMBLY
The Four Stages of the Assembly Process
Frame Assembly
—You will begin by assem-
bling the base and the uprights that form the
skeleton of the weight system.
Arm Assembly
—During this stage, you will
assemble the arms and the leg lever.
Cable Assembly
—During this stage, you will
attach the cables and pulleys that connect the
arms to the weights.
Seat Assembly
—During the final stage, you will
assemble the seat and the backrest.
To make assembly easier, carefully read the
following information and instructions:
• Assembly requires two persons.
• Because of its weight and size, the weight system
should be assembled in the location where it will
be used. Make sure that there is enough clear-
ance to walk around the weight system while you
assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• The following tools (not included) may be required
for assembly:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.