69
4.4.3 For 16 gear models
Select the gear you want with lever 3, fig. 1.
Positions: see fig. 13.
N = Neutral
L = Slow
V = Fast
Select the gear you want with lever (4, fig. 1) in the combinations detailed in fig.
8.
Through lever 4, fig. 2 you can select (see fig. 14):
N = Neutral
A = Forward
R = Reverse
When engaging reverse or subsequently, forward gears, the
engine should always be idling and the wheels stopped.
4.5 STOPPING THE TRACTOR
a) Move the throttle (8, fig. 2) up to the idling position and release the accelerator
pedal (10, fig. 1).
b) Push in the clutch completely (1, fig. 1).
c) Put the speed range lever (3, fig. 1) and the gear lever (4, fig. 1) in neutral
and, where present, also lever (4, fig. 2)
Pull the parking brake (13, fig. 1) up.
4.6 DIFFERENTIAL LOCK
The tractor has differential lock on the rear axle. Differential locking is with pedal
(7, fig. 1). When this button is released, differential lock will be automatically
disengaged.
To get the most out of the device, engage the differential lock before the wheels
begin to slip. Do not engage the lock while one wheel is already slipping.
Only use the differential lock with low gears and reduce engine
speed ahead of time. Do not use the differential lock going into or in
curves. If the differential lock does not release, reduce engine speed, stop
the tractor and release the differential lock.
Summary of Contents for FH0085
